Methods To Prolong The Service Life Of SKF Bearings

SKF W 625-2RS1 bearing
SKF bearings are a kind of central nervous system in dull operation. They work day and night, and keep advancing, like the legendary perpetual motion machine. Perpetual motion machines do not exist at all. A thing always has its life cycle and its own life span. This is a fact that we have to accept, we can only do everything possible to increase its lifespan. In order to ensure the dynamic balance of the transmission SKF bearing, the solder lugs should be balanced for de-soldering every time. The new drive shaft assembly is provided as a complete set. The device mark of the telescopic sleeve should be too thin when the new drive shaft is installed, and the flange fork should be guaranteed to be in a plane. When repairing and disassembling the drive shaft, the device logo should be printed on the telescopic sleeve and the flange shaft, so that the original device should be firmly connected when reinstalling.

Cleaning of SKF bearings

When disassembling the SKF bearing for maintenance, first record the appearance of the SKF bearing, confirm the remaining amount of lubricant, and after sampling the lubricant for inspection, wash the bearing. As a cleaning agent, gasoline and kerosene are commonly used.

The cleaning of the removed SKF bearings is divided into rough cleaning and fine cleaning, respectively, in the container, first put a metal mesh bottom, so that the SKF bearing does not directly contact the dirt of the container. During rough cleaning, if the bearing is rotated with dirt, it will damage the rolling surface of the SKF bearing, so care should be taken. In the rough cleaning oil, use a brush to remove grease and adhesions. After it is roughly clean, switch to fine cleaning.

Fine washing is to clean the SKF bearing carefully while rotating it in the cleaning oil. In addition, the cleaning oil should always be kept clean.