How To Resolve Epson Error Code 0x97?

Epson Error Code 0x97 could happen when there’s an issue with the printers internal hardware. It is because of motherboard failure or other interior parts. . Hardware failure might be requiring a quick fix or replacement. if you need support, you can contact Epson Klantenservice Belgie.

Resolve Epson Error Code 0x97,If there is an issue with the internal hardware of the printer then you will get this error code 0x97.

These are a few methods by which you can resolve this problem
Solution 1 – Try Unplugging and Plugging-In Again
Disconnect the cable which is connected with the printer
Now, disconnect the USB drivers
Remove the printer ink cartridge
Still switched off, push down the power to discharge all remaining power in the printer
Plug in all cables and the USB peripherals
Reinstall the printer ink cartridges
Now, turn on the power
Check if the error still persists

Solution 2 – Unplug and Plug-In Advanced Method
In the first, you have to turn off the Epson printer and unplug it from the power cord.
Detach all cables and USB peripherals
Now, wait for five minutes.
Push and hold the power button for a minute. Don’t release it!
Following a minute (do not release), connect the power cord and hold for an additional minute.
Release the power button. See if the error message still appears

Solution 3 – Clean the printer using wet tissue
We highly recommend that you clean your printer by using a wet tissue. Here’s how to clean up your printer:
Firstly you have to turn off the Epson printer.
Then, open the printer casing carefully.
Now, take a wet tissue to clean the printer.
Then, clean the internal parts of the printer, especially the mechanic pad and other sensitive areas.
Remove the tissue afterward and wait for 15 minutes.

Our visiting website: https://rs4264979.wixsite.com/mysite/post/hoe-epson-error-code-0x97-op-te-lossen